How to service the rear seat cushion for the 20 percent second row on Ford Explorer?

You should remove the second row seat as the first step to service the 20 percent second row seat cushion. Service the rear seat cushion according to the specified component disassembly sequence presented in both illustration and table. The first step involves removing the release handle cable from the rear seat 20 percent upper latch bolts followed by retainer clip pinching and afterward separating the cable end hook from its retaining hole to position the cable beside. The service requires removing the seat backrest J-clip followed by staple removal and lifting the material to expose the backrest nut and bolts. Dismantling the seat cushion trim cover requires careful handling because the separation of hook and loop fasteners may lead to tearing the hook and loop strip off the seat cushion foam pad. The service requires following the opposite order of disassembly steps to rebuild the component.

How to service and repair the seat cushion on Ford Mustang?

Start the seat cushion service and repair process by taking out the seat track along with the seat backrest in every vehicle. You must first remove all screws from the power seat control switch then disconnect both the electrical connector and switch before removing it completely. Standard power lumbar vehicles need their lumbar control switch removed after disconnecting power lumbar support air hoses and the electrical connector of the lumbar seat control switch. The service of the pump and solenoid module takes place as part of the seat cushion frame assembly because vehicles with both power bolster and lumbar need their power lumbar and bolster seat switch screws removed before disconnecting lumbar and bolster control switches. To begin the repair every vehicle must have its J-clips removed together with hog rings followed by the front seat cushion cover being removed from the front seat cushion pad before extracting the front seat cushion frame and spring. The process for seating with power cushion bolster requires technicians to disconnect hoses from the two bolster adjuster pads before moving the bolster adjuster pad upward from the seat cushion frame. The final assembly requires performing the disassembly procedure in the reverse order.

How to service and repair the front seat cushion for bucket and 40 percent seats on Ford Ranger?

Use safety glasses when servicing and repairing front seat cushions from bucket and 40 percent seats as the seat has a safety belt pretensioner which operates as a pyrotechnic device. The use of memory saver devices should be avoided to prevent personal injuries. Perform an SRS deactivation procedure before starting the work when the seat includes either a seat-mounted side air bag or safety belt pretensioner. The warning lamp activates when the RCM fuse is removed while keeping the ignition ON but this normal state does not indicate SRS faults. The vehicle should only return to the customer after complete SRS activation testing without any detected system faults. To perform this task the mechanic needs to disable the SRS followed by removing the affected seat and affected seat backrest. The mechanic will then remove four bolts to disconnect the seat cushion assembly. The installation procedure requires completing the reverse process by first powering up the SRS then installing the four bolts onto the seat cushion assembly followed by the affected seat backrest and affected seat.

OEM Ford Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1169 Seat Cushions found

View related parts
Ford Seat Cushion Pad, Front Passenger Side
Part Number: DR3Z-63632A22-B
$945.48 MSRP: $1500.77
You Save: $555.29 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover And Pad - Front Seat Back; Seat Cushion Foam, Front Right; Seat Cushion
- Manufacturer Note: Includes Seat Pad, Occupant Weight Sensor, Instruction Sheet And Hardware
- Position: Front Passenger Side
Fits the following Ford Models:
- Mustang | 2013-2014 | Base, Boss 302, GT, Shelby GT500 | 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Seat Cushion Pad, Front Passenger Side
Part Number: JL3Z-63632A22-F
$1752.72 MSRP: $2782.10
You Save: $1029.38 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Foam, Front Right; Seat Cushion
- Position: Front Passenger Side
Fits the following Ford Models:
- F-150 | 2018-2020 | Raptor | 6 Cyl 3.5 L GAS
View related parts
Ford Seat Cushion Pad, Front Passenger Side
Part Number: F1EZ-58632A22-A
$651.57 MSRP: $1034.23
You Save: $382.66 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Foam, Front Right; Seat Cushion
- Manufacturer Note: Includes Seat Pad, Occupant Weight Sensor, And Hardware
- Position: Front Passenger Side
Fits the following Ford Models:
- Focus | 2015-2018 | RS, S, SE, SEL, ST, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Seat Cushion Pad, Front Driver Side
Part Number: FR3Z-63632A23-F
$641.07 MSRP: $1017.57
You Save: $376.50 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Foam, Front Left; Seat Cushion
- Position: Front Driver Side
Fits the following Ford Models:
- Mustang | 2015-2022 | Shelby GT350, Shelby GT350R, Shelby GT500 | 8 Cyl 5.2 L GAS
View related parts
Ford Seat Back Pad, Front Driver Side
Part Number: LJ6Z-7864811-F
$124.96 MSRP: $362.83
You Save: $237.87 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Left
- Position: Front Driver Side
- Replaced by: LJ6Z-7864811-H
Fits the following Ford Models:
- Escape | 2020-2023 | Active, Platinum, Platinum Hybrid, Plug-In Hybrid, S, SE, SE Hybrid, SE Plug-In Hybrid, SE Sport Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, ST-Line, ST-Line Elite, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select, ST-Line Select Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Seat Back Pad, Front Passenger Side
Part Number: DM5Z-5864810-G
$197.10 MSRP: $307.02
You Save: $109.92 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Right
- Position: Front Passenger Side
- Replaces: CV6Z-5864810-C
Fits the following Ford Models:
- Focus | 2012-2014 | Electric, S, SE, SEL, ST, Titanium | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, BATTERY EV (EV/BEV)
View related parts
Ford Seat Back Pad, Front
Part Number: FL1Z-7864811-A
$318.90 MSRP: $500.00
You Save: $181.10 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Left
- Manufacturer Note: RH/LH
- Position: Front
Fits the following Ford Models:
- Expedition | 2007-2008 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Seat Back Pad, Front Passenger Side
Part Number: BB5Z-78632A22-G
$239.67 MSRP: $373.32
You Save: $133.65 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating; Seat Back Cushion, Front Right
- Manufacturer Note: Heat Element Included
- Position: Front Passenger Side
- Replaces: BB5Z-7864810-C
Fits the following Ford Models:
- Explorer | 2011-2015 | Base, Limited, Sport, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Seat Back Pad, Front Driver Side
Part Number: BG1Z-5464811-C
$156.91 MSRP: $228.40
You Save: $71.49 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Left
- Position: Front Driver Side
- Replaces: BG1Z-5464811-A, AG1Z-5464811-A
Fits the following Ford Models:
- Taurus | 2010-2019 | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Seat Back Pad, Rear Driver Side
Part Number: FL3Z-1866801-B
$149.96 MSRP: $231.42
You Save: $81.46 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Back; Seat Back Cushion, Rear Left
- Position: Rear Driver Side
- Replaces: FL3Z-1866801-A
Fits the following Ford Models:
- F-150 | 2015-2020 | Lariat, Raptor, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
View related parts
Ford Seat Back Pad, Front Driver Side
Part Number: FS7Z-5464811-C
$167.48 MSRP: $258.45
You Save: $90.97 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating; Seat Back Cushion, Front Left
- Manufacturer Note: Heat Element Included
- Position: Front Driver Side
Fits the following Ford Models:
- Fusion | 2015-2016 | Energi SE, Energi Titanium, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Seat Back Pad, Front Driver Side
Part Number: JL1Z-7864811-C
$426.56 MSRP: $668.80
You Save: $242.24 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating; Seat Back Cushion, Front Left
- Position: Front Driver Side
Fits the following Ford Models:
- Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Seat Cushion Pad, Front Driver Side
Part Number: JL1Z-78632A23-J
$565.47 MSRP: $837.73
You Save: $272.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating; Seat Cushion Pad, Front Left; Seat Cushion
- Manufacturer Note: Heat Element Included
- Position: Front Driver Side
Fits the following Ford Models:
- Expedition | 2018-2024 | King Ranch, Max King Ranch, Max Platinum, Platinum | 6 Cyl 3.5 L GAS
View related parts
Ford Seat Cushion Pad
Part Number: KT4Z-58632A23-A
$319.05 MSRP: $500.23
You Save: $181.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion
Fits the following Ford Models:
- Edge | 2020-2024 | SE, SEL, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Seat Cushion Pad, Front Center Driver Side
Part Number: JL1Z-78632A23-E
$420.32 MSRP: $659.02
You Save: $238.70 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating; Seat Cushion Pad, Center Left
- Position: Front Center Driver Side
Fits the following Ford Models:
- Expedition | 2018-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Seat Back Pad, Front Passenger Side
Part Number: JL1Z-7864810-A
$468.11 MSRP: $687.38
You Save: $219.27 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating; Seat Back Cushion, Front Right
- Position: Front Passenger Side
Fits the following Ford Models:
- Expedition | 2018-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Seat Cushion Pad, Front Passenger Side
Part Number: JL3Z-1663222-A
$118.45 MSRP: $172.42
You Save: $53.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Pad, Front Right; Seat Cushion
- Position: Front Passenger Side
Fits the following Ford Models:
- F-350 Super Duty | 2020-2022 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford Seat Back Pad, Front Passenger Side
Part Number: LB5Z-7864810-A
$115.63 MSRP: $177.95
You Save: $62.32 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Right
- Position: Front Passenger Side
Fits the following Ford Models:
- Explorer | 2020-2023 | Base, King Ranch, Limited, Limited Hybrid, Platinum, Platinum Hybrid, ST, ST-Line, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Seat Back Pad, Front Center Driver Side
Part Number: JL1Z-78632A23-F
$463.97 MSRP: $681.30
You Save: $217.33 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Assembly - Front Seat Heating; Seat Back Cushion, Center Left
- Position: Front Center Driver Side
Fits the following Ford Models:
- Expedition | 2018-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Seat Cushion Pad, Rear Center Driver Side
Part Number: 7L1Z-7863841-B
$134.13 MSRP: $206.98
You Save: $72.85 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Pad, Center Left
- Position: Rear Center Driver Side
Fits the following Ford Models:
- Expedition | 2007-2017 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

| Page 1 of 59 |Next >

1-20 of 1169 Results

Ford Seat Cushion Parts Questions & Experts Answers

Seat Cushion, Rear Center Passenger Side
1L2Z-7863840-CA
Q: How to service the rear seat cushion for the 20 percent second row on Ford Explorer?
A: You should remove the second row seat as the first step to service the 20 percent second row seat cushion. Service the rear seat cushion according to the specified component disassembly sequence presented in both illustration and table. The first step involves removing the release handle cable from the rear seat 20 percent upper latch bolts followed by retainer clip pinching and afterward separating the cable end hook from its retaining hole to position the cable beside. The service requires removing the seat backrest J-clip followed by staple removal and lifting the material to expose the backrest nut and bolts. Dismantling the seat cushion trim cover requires careful handling because the separation of hook and loop fasteners may lead to tearing the hook and loop strip off the seat cushion foam pad. The service requires following the opposite order of disassembly steps to rebuild the component.
Seat Cushion Pad, Front Driver Side
XR3Z-6364811-BA
Q: How to service and repair the seat cushion on Ford Mustang?
A: Start the seat cushion service and repair process by taking out the seat track along with the seat backrest in every vehicle. You must first remove all screws from the power seat control switch then disconnect both the electrical connector and switch before removing it completely. Standard power lumbar vehicles need their lumbar control switch removed after disconnecting power lumbar support air hoses and the electrical connector of the lumbar seat control switch. The service of the pump and solenoid module takes place as part of the seat cushion frame assembly because vehicles with both power bolster and lumbar need their power lumbar and bolster seat switch screws removed before disconnecting lumbar and bolster control switches. To begin the repair every vehicle must have its J-clips removed together with hog rings followed by the front seat cushion cover being removed from the front seat cushion pad before extracting the front seat cushion frame and spring. The process for seating with power cushion bolster requires technicians to disconnect hoses from the two bolster adjuster pads before moving the bolster adjuster pad upward from the seat cushion frame. The final assembly requires performing the disassembly procedure in the reverse order.
Seat Cushion Pad, Front
4L5Z-10632A22-AA
Q: How to service and repair the front seat cushion for bucket and 40 percent seats on Ford Ranger?
A: Use safety glasses when servicing and repairing front seat cushions from bucket and 40 percent seats as the seat has a safety belt pretensioner which operates as a pyrotechnic device. The use of memory saver devices should be avoided to prevent personal injuries. Perform an SRS deactivation procedure before starting the work when the seat includes either a seat-mounted side air bag or safety belt pretensioner. The warning lamp activates when the RCM fuse is removed while keeping the ignition ON but this normal state does not indicate SRS faults. The vehicle should only return to the customer after complete SRS activation testing without any detected system faults. To perform this task the mechanic needs to disable the SRS followed by removing the affected seat and affected seat backrest. The mechanic will then remove four bolts to disconnect the seat cushion assembly. The installation procedure requires completing the reverse process by first powering up the SRS then installing the four bolts onto the seat cushion assembly followed by the affected seat backrest and affected seat.