Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor; Starter Motor Reman; Starters
Fits the following Mercury Models:
Mountaineer | 2006-2010 | Luxury, Premier | 8 Cyl 4.6 L GAS
| Page 1 of 2 |Next >
1-20 of 33 Results
Mercury Starter
OEM Starter boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Starter with long life and a perfect fit. Come to our website and find genuine Mercury parts. We keep a wide inventory of OEM parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.
Q: How to Ensure Proper Functioning of the Starter in a Mercury Cougar?
A:
The procedure for fixing the starter motor starts with removing the battery ground cable. Next, remove the air cleaner. The starter motor upper bolts need removal while paying attention to the fact that the engine ground cable is fixed to one of the bolts. The maintenance procedure starts with cable tie cutting. Before the installation start the vehicle must be supported in the air to proceed with starter motor electrical connector removal and motor removal. Follow the opposite steps for installing the component after removal.
Q: How to service the starter motor on a 2.5L engine on Mercury Mariner?
A:
A 2.5L vehicle starting motor service process starts with hoisting the vehicle into neutral position while disconnecting the battery ground cable. Follow the next step by first removing five bolts that attach with the pin-type retainer and right-hand splash shield then return the bolt torques back to 9 Nm (80 lb-in). Follow these steps for the reinstallation of the starter solenoid wire by disconnecting the nut while tightening it to 5 Nm (44 lb-in). The starter solenoid battery cable nut requires removal for starter motor solenoid terminal cover and cable detachment before securing these connections to 12 Nm (106 lb-in). By removing the ground wire nut you should set this ground wire aside before securement at 25 Nm (18 lb-ft) during reinstallation. After removing both stud bolts and the starter motor you can reinstall the bolts to 35 Nm (26 lb-ft) while following the exact removal process to finish installation.