Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Right; Retractor Assembly; Latch
Manufacturer Note: (-C*)
Position: Rear Passenger Side
Replaces: 7L1Z-40611B68-BB
Fits the following Ford Models:
Expedition | 2007-2014 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Rear Center; Center Seat Belt
Position: Rear Center
Fits the following Ford Models:
Expedition | 2007-2014 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Seat Belt Assembly; Seat Belt Lap and Shoulder Belt, Center Right; Outer Belt Assembly
Manufacturer Note: Light Stone
Position: Center Passenger Side
Fits the following Ford Models:
Expedition | 2018-2021 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
Q: What Precautions Should Be Taken for Safe Repair of Seat Belt Pretensioners on Ford Explorer?
A: Safety glass protection should be used during all vehicle air bag-related maintenance and safety belt buckle pretensioner and safety belt retractor pretensioner servicing because the safety belt pretensioner functions as a device with pyrotechnic elements. Examining the pretensioner electrical connector could cause unintentional deployment leading to personal injuries so it should always be avoided. Safety belt retractor pretensioners require manual gymnastics with avoiding clothing and fingers from moving components to eliminate risks of injuries if the system activates unintentionally. All non-functional safety belt buckle pretensioners and safety belt retractor pretensioners need immediate return to Ford Motor Company through the Mandatory Return List. Inoperative safety belt buckle pretensioners and safety belt retractor pretensioners should be removed from a vehicle after depowering the system. The inoperative safety belt buckle pretensioner or safety belt retractor pretensioner must be correctly packaged before sending it to Ford Motor Company.
Q: How Should Seat Belt Service and Repair Be Conducted for Anchor Plate Thread Damage Involving 7/16-20 Bolts on Ford Mustang?
A: Seat belt service and repair that affects 7/16-20 bolts on anchor plates requires correct reinstalling of factory-installed lap/shoulder seat belts after their removal. Begin the process of threading out the internal threading in the seat belt anchor plate with a 27/64 inch drill bit before removing the broken bolt. After rethreading the anchor plate with the 1/2-13 tap, use compressed air to remove all chips. The Parts Replacement Chart for seat belts with damaged weld nut anchor plate threads specifies that new parts should always be used instead of original components. End with hand-tightening a new bolt before fully tightening it up to meet Torque Specifications specified in the table.
Q: How to Address Seat Belt Anchor Plate Thread Damage on Ford Ranger?
A: Repair of seat belt anchor plate thread damage starts by eliminating both damaged bolts and then moving forward with the procedures. The drilling of internal threads in the seat belt anchor plate requires a 27/64 inch drill. The anchor plate needs a 1/2-13 tap installation process to complete its rethreading. Clear away any particles that developed through drilling and tapping the seat belt anchor plate. The installation of attachment components should include only the use of original parts that follow the instructions found in the Seat Belt Parts Replacement Guidelines. The procedure requires using the floor bottom to install the bolt-nut combination for repairs needing several belts and attachments.