How to remove and reinstall the flywheel and inspect related components in four cylinder engine on Mercury Capri?

Raise the vehicle and support it securely on jackstands, then remove the transmission. If it's leaking, now would be a very good time to replace the front pump seal/O-ring for automatic transmissions. Remove the pressure plate and clutch disc for manual transmission equipped vehicles, and check or replace the clutch components and pilot bearing. Use a center-punch to make alignment marks on the flywheel and crankshaft to ensure correct alignment during reinstallation. Remove the bolts that secure the flywheel to the crankshaft; if the crankshaft turns, wedge a screwdriver through the starter opening to jam the flywheel. Carefully remove the flywheel from the crankshaft, supporting it while removing the last bolt due to its weight. Clean the flywheel to remove grease and oil, inspecting the surface for cracks, rivet grooves, burned areas, and score marks, with light scoring removable using emery cloth. Check for cracked and broken ring gear teeth, laying the flywheel on a flat surface to use a straightedge for checking warpage. Clean and inspect the mating surfaces of the flywheel and crankshaft, replacing the crankshaft rear seal if it is leaking before reinstalling the flywheel. Position the flywheel against the crankshaft, aligning the marks made during removal, noting that some engines have an alignment dowel or staggered bolt holes for correct installation. Apply thread locking compound to the bolt threads before installation, and wedge a screwdriver through the starter motor opening to keep the flywheel from turning as you tighten the bolts to the specified torque. The remainder of installation follows the reverse of the removal procedure.

OEM Mercury Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

40 Flywheels found

View related parts
Mercury Drive Plate Part Number: 1S7Z-6375-D
$72.02 MSRP: $110.83
You Save: $38.81 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Flywheel Assembly; Flywheel
- Replaced by: 1S7Z-6375-E
- Replaces: 1L8Z-6375-AA, 1S7Z-6375-B
Fits the following Mercury Models:
- Mariner | 2005-2011 | Base, Convenience, Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS
- Milan | 2010-2011 | Base, Premier | 4 Cyl 2.5 L GAS
View related parts
Mercury Drive Plate Part Number: F1DZ-6375-CA
$86.39 MSRP: $117.56
You Save: $31.17 (27%)
ADD TO CART
Product Specifications
- Other Name: Flywheel Assembly; Flywheel
Fits the following Mercury Models:
- Sable | 1992-1995 | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Mercury Ring Gear Part Number: 2L5Z-6375-AA
Product Specifications
- Other Name: Flywheel Assembly; Clutch Flywheel Ring Gear; Clutch Flywheel; Flywheel; Gear
- Replaces: 1L5Z-6375-AA, D2RY-6384-A
Fits the following Mercury Models:
- Mountaineer | 1998-2001 | Base | 6 Cyl 4.0 L GAS
View related parts
Mercury Drive Plate Part Number: 6L2Z-6375-AA
Product Specifications
- Other Name: Flywheel Assembly; Flywheel
Fits the following Mercury Models:
- Mountaineer | 2006-2010 | Luxury, Premier | 8 Cyl 4.6 L GAS
View related parts
Mercury Drive Plate Part Number: E2AZ-6375-A
Product Specifications
- Other Name: Flywheel Assembly; Flywheel
Fits the following Mercury Models:
- Capri | 1984-1986
- Colony Park | 1987-1991 | GS, LS | 8 Cyl 5.0 L GAS
- Cougar | 1991-1993, 1984-1988 | Base, LS, XR-7 | 8 Cyl 5.0 L GAS
- Grand Marquis | 1984-1991 | Base, Colony Park, GS, LS | 8 Cyl 5.0 L GAS
- Mountaineer | 1997-2001 | Base | 8 Cyl 5.0 L GAS
View More
View related parts
Mercury Drive Plate Part Number: F8RZ-6375-BA
Product Specifications
- Other Name: Flywheel Assembly; Automatic Transmission Flexplate; Flywheel
- Replaces: F5RZ-6375-B
Fits the following Mercury Models:
- Cougar | 1999
- Mystique | 1995-2000 | Base, GS, GS Spree, LS | 4 Cyl 2.0 L GAS
View related parts
Mercury Drive Plate Part Number: 5M8Z-6375-BB
Product Specifications
- Other Name: Plate Assembly - Converter Drive; Automatic Transmission Flexplate; Flywheel
Fits the following Mercury Models:
- Milan | 2006-2009 | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Flywheel Part Number: 8E5Z-6375-A
Product Specifications
- Other Name: Flywheel And Ring Gear Assembly; Clutch Flywheel
Fits the following Mercury Models:
- Milan | 2010-2011 | Base, Premier | 4 Cyl 2.5 L GAS
View related parts
Mercury Drive Plate Part Number: 1W2Z-6375-AA
Product Specifications
- Other Name: Flywheel Assembly; Flywheel
- Manufacturer Note: ATX
Fits the following Mercury Models:
- Cougar | 2001-2002 | Base, S, V6 | 6 Cyl 2.5 L GAS
View related parts
Mercury Flywheel Part Number: E4FZ6375C
Product Specifications
- Other Name: Flywheel Assembly
Fits the following Mercury Models:
- Sable | 1986 | GS | 4 Cyl 2.5 L GAS
- Topaz | 1984-1991 | Base, GS, GS AWD, LS, LS AWD, LTS, LTS AWD, Sport, Sport AWD, XR5, XR5 AWD | 4 Cyl 2.3 L GAS
View related parts
Mercury Flywheel Part Number: E69Z6375B
Product Specifications
- Other Name: Flywheel Assembly
Fits the following Mercury Models:
- Topaz | 1992-1994 | GS, LTS, Sport, XR5 | 6 Cyl 3.0 L GAS
View related parts
Mercury Flywheel Part Number: E6ZZ-6375-A
Product Specifications
- Other Name: Flywheel Assembly
Fits the following Mercury Models:
- Capri | 1986
View related parts
Mercury Drive Plate Part Number: E9SZ6375B
Product Specifications
- Other Name: Flywheel Assembly; Flywheel
Fits the following Mercury Models:
- Cougar | 1988-1995 | LS, XR-7 | 6 Cyl 3.8 L GAS
View related parts
Mercury Drive Plate Part Number: EOAZ6375A
Product Specifications
- Other Name: Flywheel Assembly; Flywheel
Fits the following Mercury Models:
- Grand Marquis | 1986 | Base, LS
View related parts
Mercury Drive Plate Part Number: F1AZ-6375-A
Product Specifications
- Other Name: Plate Assembly - Drive; Flywheel
Fits the following Mercury Models:
- Cougar | 1994-1995 | XR-7 | 8 Cyl 4.6 L GAS
- Grand Marquis | 1992-1995 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Pressure Plate Part Number: F1DZ-7A537-A
Product Specifications
- Other Name: Kit - Clutch Disc Repair; Clutch Kit
- Replaces: FODZ-7A537-A
Fits the following Mercury Models:
- Sable | 1992-1995 | GS, LS, LTS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Drive Plate Part Number: F5DZ-6375-A
Product Specifications
- Other Name: Flywheel Assembly; Flywheel
Fits the following Mercury Models:
- Sable | 1996-2005 | G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Flywheel Part Number: F6RZ-6375-AA
Product Specifications
- Other Name: Flywheel Assembly
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base, S, V6 | 6 Cyl 2.5 L GAS
- Mystique | 1995-2000 | Base, GS, GS Spree, LS, LS Young America | 6 Cyl 2.5 L GAS
View related parts
Mercury Flywheel Part Number: F7RZ-6375-AA
Product Specifications
- Other Name: Flywheel And Ring Gear; Flywheel And Ring Gear Assembly
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base | 4 Cyl 2.0 L GAS
- Mystique | 1995-2000 | Base, GS, GS Spree, LS | 4 Cyl 2.0 L GAS
View related parts
Mercury Flywheel Part Number: F8CZ-6375-BA
Product Specifications
- Other Name: Flywheel And Ring Gear; Flywheel And Ring Gear Assembly
- Manufacturer Note: MTX
Fits the following Mercury Models:
- Tracer | 1998-1999 | GS, LS, Trio | 4 Cyl 2.0 L GAS

| Page 1 of 2 |Next >

1-20 of 40 Results

Mercury Flywheel

If you own Mercury and want to keep it in top shape, choosing OEM Flywheel is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Flywheel at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

The Mercury Flywheel stores engine momentum to provide smooth starts and steady power immediately after it comes off idle. Mercury began in 1938 and soon found its niche combining harsh styling with a more comfortable ride than competitors as families enjoyed spacious cabins and a quieter journey at a price not overcharged. Mercury introduced Cougars, Grand Marquis sedans and other nameplates that demonstrated that you could be as at home on the road as well as affordable, and still look like a slick car. Mercury continued to push comfort forward with each decade, improving the performance of the suspensions, reducing the noise in the cabin, and improving controls to make driving cars in the long run more comfortable and driving in everyday traffic more confident. A 2011 legacy of accessible innovation has proved that clever enhancements to ride quality and interior quiet are sometimes what counts more than raw horsepower. The solid Flywheel is ruggedly reliable and a two-mass design positions an internal damper that absorbs torsional spikes, soothes the drivetrain and maintains a smooth clutch take-up even when the engine is dropped to low revolutions. Flywheel also protects ring gear and clutch faces from wearing unevenly and ensures that launches are repeatable and shudder free. When ignition occurs the Flywheel joins up with the starter, stores spin and gives off constant torque to idle. Underway the Flywheel levels all the power strokes, reduces vibration and extends the life of the drivetrain to all the available models.

Mercury Flywheel Parts and Q&A

Flywheel
E6ZZ-6375-A
Q: How to remove and reinstall the flywheel and inspect related components in four cylinder engine on Mercury Capri?
A:
Raise the vehicle and support it securely on jackstands, then remove the transmission. If it's leaking, now would be a very good time to replace the front pump seal/O-ring for automatic transmissions. Remove the pressure plate and clutch disc for manual transmission equipped vehicles, and check or replace the clutch components and pilot bearing. Use a center-punch to make alignment marks on the flywheel and crankshaft to ensure correct alignment during reinstallation. Remove the bolts that secure the flywheel to the crankshaft; if the crankshaft turns, wedge a screwdriver through the starter opening to jam the flywheel. Carefully remove the flywheel from the crankshaft, supporting it while removing the last bolt due to its weight. Clean the flywheel to remove grease and oil, inspecting the surface for cracks, rivet grooves, burned areas, and score marks, with light scoring removable using emery cloth. Check for cracked and broken ring gear teeth, laying the flywheel on a flat surface to use a straightedge for checking warpage. Clean and inspect the mating surfaces of the flywheel and crankshaft, replacing the crankshaft rear seal if it is leaking before reinstalling the flywheel. Position the flywheel against the crankshaft, aligning the marks made during removal, noting that some engines have an alignment dowel or staggered bolt holes for correct installation. Apply thread locking compound to the bolt threads before installation, and wedge a screwdriver through the starter motor opening to keep the flywheel from turning as you tighten the bolts to the specified torque. The remainder of installation follows the reverse of the removal procedure.