How to Service and Repair the Coolant Reservoir for the 2.3L Engine on Ford Ranger?

It is essential to wait for engine cooling before opening the cooling system due to its high pressure condition because strong forces of steam and hot liquid can cause serious injuries. The first step to relieve cooling system pressure requires a slow turn of the pressure relief cap counterclockwise for half a turn followed by removing the cap. After clamping the EGR valve heater hose with hose clamp pliers you should use a suitable suction device to drain coolant from the degas bottle. The speed control servo bolt must be removed when present and the servo should be set aside for reinstalling it with a torque of 11 Nm (97 lb-in). Saving the engine coolant requires disconnecting the EGR valve heater hose and directing the drain into a proper receptacle before proceeding to unscrew coolant lines and radiator vents. Reinstall the degas bottle after removing its securing bolt and nut then tighten them to 7 Nm (62 lb-in). Put in reverse the steps for installation while filling the degas bottle with recommended coolant mixture until reaching the correct fill level.

How to service the coolant reservoir safely and effectively on Ford Mustang?

A safe procedure to service the coolant reservoir includes avoiding unscrewing the coolant pressure relief cap while the engine operates or when the system remains hot because the under-pressured system could forcefully eject hot liquid and steam. You need to turn the pressure relief cap slowly counterclockwise for a half-turn to then take it out. Hose clamp pliers will be used for clamping the lower degas bottle hose while suctioning coolant from the bottle through appropriate equipment. The technician puts aside both the upper and lower degas bottle hoses after disconnecting them. You should remove the two degas bottle bolts for taking out the degas bottle while tightening these bolts to 8 Nm (71 inch lbs.) when reattaching everything. Finishing the procedure involves putting coolant into the degas bottle in the reverse order of removal.

OEM Ford Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

126 Coolant Reservoirs found

View related parts
Ford Reservoir Part Number: AC3Z-8A080-A
$80.23 MSRP: $116.78
You Save: $36.55 (32%)
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
- Replaces: 7C3Z-8A080-A, 9C3Z-8A080-F, 9C3Z-8A080-E
Fits the following Ford Models:
- F-250 Super Duty | 2007-2010 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
- F-350 Super Duty | 2007-2010 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Reservoir Tank Part Number: 4C2Z-8A080-AA
$130.87 MSRP: $190.50
You Save: $59.63 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
Fits the following Ford Models:
- E-350 Club Wagon | 2005 | Chateau, XL, XLT | 8 Cyl 6.0 L DIESEL
- E-350 Super Duty | 2005-2007 | Base, Chateau, XL, XLT | 8 Cyl 6.0 L DIESEL
View related parts
Ford Battery Tray, Driver Side Part Number: 9C3Z-8A080-AA
$308.63 MSRP: $453.20
You Save: $144.57 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Tray - Utility; Engine Coolant Reservoir; Reservoir; Tank Assembly - Radiator Overflow; Coolant Reservoir
- Position: Driver Side
- Replaces: 8C3Z-10732-A
Fits the following Ford Models:
- F-250 Super Duty | 2008-2010 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
- F-350 Super Duty | 2008-2010 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
Ford Expansion Tank, Lower Part Number: BL3Z-8A080-B
$210.24 MSRP: $308.72
You Save: $98.48 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Air Filter Housing, Lower; Lower Tray; Lower Housing; Air Filter Housing
- Position: Lower
Fits the following Ford Models:
- Expedition | 2015-2017 | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
- F-150 | 2011-2014 | FX2, FX4, King Ranch, Lariat, Limited, Platinum, STX, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 8 Cyl 5.0 L FLEX
View related parts
Ford Expansion Tank, Driver Side Part Number: BC3Z-8A080-H
$340.67 MSRP: $500.25
You Save: $159.58 (32%)
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Tank; Reservoir; Coolant Reservoir
- Position: Driver Side
- Replaces: BC3Z-8A080-B, BC3Z-8A080-G
Fits the following Ford Models:
- F-250 Super Duty | 2011-2016 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
- F-350 Super Duty | 2011-2016 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL
View related parts
Ford Reservoir Part Number: 5W4Z-8A080-AA
$256.25 MSRP: $376.28
You Save: $120.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
- Replaces: XW4Z-8A080-AA
Fits the following Ford Models:
- Thunderbird | 2002-2005 | 50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster | 8 Cyl 3.9 L GAS
View related parts
Ford Washer Reservoir, Front Part Number: F77Z-17618-A
$62.62 MSRP: $86.63
You Save: $24.01 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir, Front; Windshield Washer Reservoir; Coolant Reservoir; Reservoir
- Position: Front
- Replaces: F57Z-17618-BA
Fits the following Ford Models:
- Explorer | 1995-2001 | Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
- Explorer Sport | 2001 | Base | 6 Cyl 4.0 L GAS
- Explorer Sport Trac | 2001-2002 | Base, XL | 6 Cyl 4.0 L GAS
- Ranger | 1998-2004 | Edge, Splash, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View More
View related parts
Ford Expansion Tank Part Number: CA8Z-8A080-A
$85.07 MSRP: $123.83
You Save: $38.76 (32%)
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Reservoir; Coolant Reservoir
- Manufacturer Note: Service Kit
- Replaces: 8A8Z-8A080-A, 8A8Z-8A080-B, AA8Z-8A080-A
Fits the following Ford Models:
- Flex | 2009-2019 | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Reservoir Part Number: 3F1Z-8A080-EA
$73.50 MSRP: $100.02
You Save: $26.52 (27%)
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
- Replaces: 1F1Z-8A080-BA
Fits the following Ford Models:
- Taurus | 1996-2003 | LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Expansion Tank Part Number: AT4Z-8A080-CA
$69.93 MSRP: $101.78
You Save: $31.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Reservoir; Coolant Reservoir
- Replaces: 9T4Z-8A080-A, 7T4Z-8A080-A
Fits the following Ford Models:
- Edge | 2007-2014 | Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Reservoir Part Number: 9C3Z-8A080-E
$80.23 MSRP: $116.78
You Save: $36.55 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Coolant Reservoir
- Replaced by: AC3Z-8A080-A
Fits the following Ford Models:
- F-250 Super Duty | 2009 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
- F-350 Super Duty | 2009 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expansion Tank Part Number: LC3Z-8286-B
$211.34 MSRP: $350.91
You Save: $139.57 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly; Multi Purpose Hose; Radiator Hose; Cooling Hose; Reservoir Hose; Lower Hose
Fits the following Ford Models:
- F-250 Super Duty | 2020-2024 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2020-2024 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 7.3 L GAS
View related parts
Ford Expansion Tank Part Number: BC3Z-8A080-F
$205.39 MSRP: $298.97
You Save: $93.58 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Air Filter Housing; Air Cleaner Body
Fits the following Ford Models:
- F-250 Super Duty | 2011-2016 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX
- F-350 Super Duty | 2011-2016 | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX
View related parts
Ford Expansion Tank Part Number: LC3Z-9600-H
$393.28 MSRP: $577.50
You Save: $184.22 (32%)
ADD TO CART
Product Specifications
- Other Name: Tray - Utility; Reservoir
Fits the following Ford Models:
- F-250 Super Duty | 2023-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2023-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford Expansion Tank Part Number: AL1Z-8A080-B
$242.80 MSRP: $356.53
You Save: $113.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Air Filter Housing; Coolant Reservoir; Lower Tray
- Replaces: 7L1Z-8A080-A
Fits the following Ford Models:
- Expedition | 2007-2008 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expansion Tank, Driver Side Part Number: LC3Z-9600-F
$393.28 MSRP: $577.50
You Save: $184.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tray - Utility; Engine Coolant Reservoir; Battery Tray, Left; Coolant Reservoir; Battery Tray; Reservoir Tank; Reservoir Assembly; Reservoir
- Position: Driver Side
- Replaced by: LC3Z-9600-H
- Replaces: LC3Z-8A080-A, LC3Z-8A080-B
Fits the following Ford Models:
- F-250 Super Duty | 2020-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
- F-350 Super Duty | 2020-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford Expansion Tank, Driver Side Part Number: HC3Z-10732-B
$301.21 MSRP: $442.30
You Save: $141.09 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Battery Tray; Reservoir Tank; Reservoir
- Position: Driver Side
- Replaces: HC3Z-8A080-D
Fits the following Ford Models:
- F-250 Super Duty | 2017-2019 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
- F-350 Super Duty | 2017-2019 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford Expansion Tank Part Number: BR3Z-8A080-B
$78.12 MSRP: $113.72
You Save: $35.60 (32%)
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Reservoir; Coolant Reservoir
Fits the following Ford Models:
- Mustang | 2011-2014 | Shelby GT500 | 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Level Sensor Part Number: DV6Z-8A080-B
$340.97 MSRP: $500.68
You Save: $159.71 (32%)
Product Specifications
- Other Name: Pipe Assembly; Coolant Level Sensor; Tank Assembly - Radiator Overflow
Fits the following Ford Models:
- Escape | 2013-2016 | SE, SEL, Titanium | 4 Cyl 1.6 L GAS
View related parts
Ford Recovery Tank Part Number: 2R3Z-8A080-AC
$77.07 MSRP: $112.18
You Save: $35.11 (32%)
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
Fits the following Ford Models:
- Mustang | 1997-2004 | Base | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS

| Page 1 of 7 |Next >

1-20 of 126 Results

Ford Coolant Reservoir

If you own Ford and want to keep it in top shape, choosing OEM Coolant Reservoir is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Ford Coolant Reservoir at some of the affordable online prices without cutting quality. Every OEM Ford part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Ford Coolant Reservoir maintains the coolant to remain pressurized and closed so as to protect all the engines against the extreme changes of nature in its heat. In 1913, Ford threw the entire organization into the moving line, cutting down the time and cost of all. In these modern times, Ford matches EcoBoost punch with thrift, which is power need not guzzle. SYNC is a robot who complies with verbal instructions so drivers can spin tracks or reroute at a faster rate than at a swipe. Co-Pilot360 pushes the steer and slams the brakes, reducing the chances of any accident to all the passengers on board. Electric trucks such as the F-150 Lightning are quiet and clean haulers that demonstrate the blue oval some new tricks. Any Ford loop with Coolant Reservoir is a live expansion chamber, where hot overflow consumes it, and it is pumped back when the metal cools to cover the air and leaks. Coolant Reservoir choices are divided into overflow bottles, which vent to atmospheric pressure and sealed expansion tanks, which remain pressurized within the circulation system. Ford is attached either on the side of the radiator to flow fast. Coolant Reservoir plastic vibrates and gets hot after every mile and thus monthly inspections of cracks and seepage warn of trouble early. Change at the first scar and refill till the molded line is complete to keep the pump happy. Disregard a tired Coolant Reservoir and the steam will shoot out as soon as traffic snarls on a hot day.

Ford Coolant Reservoir Parts and Q&A

Reservoir
2L5Z-8A080-AA
Q: How to Service and Repair the Coolant Reservoir for the 2.3L Engine on Ford Ranger?
A:
It is essential to wait for engine cooling before opening the cooling system due to its high pressure condition because strong forces of steam and hot liquid can cause serious injuries. The first step to relieve cooling system pressure requires a slow turn of the pressure relief cap counterclockwise for half a turn followed by removing the cap. After clamping the EGR valve heater hose with hose clamp pliers you should use a suitable suction device to drain coolant from the degas bottle. The speed control servo bolt must be removed when present and the servo should be set aside for reinstalling it with a torque of 11 Nm (97 lb-in). Saving the engine coolant requires disconnecting the EGR valve heater hose and directing the drain into a proper receptacle before proceeding to unscrew coolant lines and radiator vents. Reinstall the degas bottle after removing its securing bolt and nut then tighten them to 7 Nm (62 lb-in). Put in reverse the steps for installation while filling the degas bottle with recommended coolant mixture until reaching the correct fill level.
Expansion Tank
4R3Z-8A080-AA
Q: How to service the coolant reservoir safely and effectively on Ford Mustang?
A:
A safe procedure to service the coolant reservoir includes avoiding unscrewing the coolant pressure relief cap while the engine operates or when the system remains hot because the under-pressured system could forcefully eject hot liquid and steam. You need to turn the pressure relief cap slowly counterclockwise for a half-turn to then take it out. Hose clamp pliers will be used for clamping the lower degas bottle hose while suctioning coolant from the bottle through appropriate equipment. The technician puts aside both the upper and lower degas bottle hoses after disconnecting them. You should remove the two degas bottle bolts for taking out the degas bottle while tightening these bolts to 8 Nm (71 inch lbs.) when reattaching everything. Finishing the procedure involves putting coolant into the degas bottle in the reverse order of removal.