How to Service the Muffler and Tail Pipe on Mercury Grand Marquis?

Starting work on the muffler and tailpipe requires users to disable the air suspension electrical power because unexpected air spring changes could move the vehicle while working. The vehicle should be in neutral gear when placing it on the hoist while removing the clamp. Enter the exhaust cutter properly to cut apart the muffler from the tailpipe. The insulator needs inspection for damage and wear so install a new one before separating it from the tailpipe. The muffler installation requires performing the inspection of its insulator before installing a new one if necessary. The installation process requires new exhaust fasteners but avoid tightening them until all components reach their correct position. Finish the installation task through fastener tightening according to specifications while drawing the flanges together evenly after following the reverse order of the removal process.

How to Service the Muffler and Tail Pipe on Mercury Milan?

Start muffler and tailpipe service by hoisting the vehicle when it is in neutral gear. Place a suitable jackstand correctly under the muffler and tailpipe to provide support while ensuring exhaust system components avoid excessive bending or twisting and never letting the exhaust hang freely from its flexible pipe. Secure the catalytic converter using a separate jackstand during the work process. Release the ground clip attachment from the exhaust hanger before you accomplish the Torca® clamp nut hand tightness that needs to be set to 47 Nm (35 lb-ft) during installation. Soapy water should be used to carefully split 4 or 5 muffler and tailpipe isolators from the vehicle while avoiding damage or tears. Extract the muffler along with the tailpipe from the catalytic converter. During installation proceed in the reverse order using proper inspection techniques to replace any found damaged or torn isolators. Begin the engine to test for any exhaust leak after finishing the installation.

OEM Mercury Tail Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

29 Tail Pipes found

View related parts
Mercury Exhaust Pipe Part Number: 8G1Z-5G274-D
$9.83 MSRP: $13.95
You Save: $4.12 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Tail Pipe
- Replaced by: 7T4Z-9450-AA
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Exhaust Pipe Part Number: 8G1Z-5G274-C
$9.83 MSRP: $13.95
You Save: $4.12 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Tail Pipe
- Replaced by: 7T4Z-9450-AA
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Exhaust Pipe Part Number: 8G1Z-5G274-B
$9.83 MSRP: $13.95
You Save: $4.12 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Tail Pipe
- Replaced by: 7T4Z-9450-AA
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Front Pipe Part Number: 4W7Z-5246-CA
$224.66 MSRP: $310.80
You Save: $86.14 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe
- Replaces: 3W7Z-5246-CA
Fits the following Mercury Models:
- Grand Marquis | 2007-2011 | GS, LS | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Mercury Front Pipe Part Number: 6E5Z-5G203-AA
$177.22 MSRP: $245.17
You Save: $67.95 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; Exhaust Intermediate Pipe, Front; Exhaust Pipe
- Position: Front
Fits the following Mercury Models:
- Milan | 2006-2007 | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Tail Pipe Part Number: F78Z-5202-AA
$71.20 MSRP: $96.89
You Save: $25.69 (27%)
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Extension Pipe
- Manufacturer Note: Outlet pipe - extension asy. - 1998/
Fits the following Mercury Models:
- Monterey | 2004-2007 | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
Mercury Front Pipe Part Number: 7E5Z-5G203-BA
Product Specifications
- Other Name: Tube Assembly; Exhaust Intermediate Pipe, Front; Exhaust Pipe
- Position: Front
Fits the following Mercury Models:
- Milan | 2007-2009 | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Exhaust Pipe, Front Part Number: 9G1Z-5G274-D
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe, Front; Exhaust Y Pipe; Front Pipe
- Position: Front
- Replaces: 8G1Z-5G274-H
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Inlet Pipe Part Number: 7E5Z-5G274-A
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Front Pipe
Fits the following Mercury Models:
- Milan | 2007-2008 | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Muffler, Rear Passenger Side Part Number: 6W7Z-5230-BA
Product Specifications
- Other Name: Muffler Assembly - Centre And Rear; Exhaust Muffler, Right
- Position: Rear Passenger Side
- Replaces: 4W7Z-5230-DA, 5W7Z-5230-BA
Fits the following Mercury Models:
- Grand Marquis | 2004-2011 | GS, GSL, Limited Edition, LS, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Mercury Inlet Pipe Part Number: 7E5Z-5G274-EA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Front Pipe
Fits the following Mercury Models:
- Milan | 2007-2008 | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Inlet Pipe, Green Part Number: 8E5Z-5G274-A
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Exhaust Y Pipe; Front Pipe
Fits the following Mercury Models:
- Milan | 2008-2009 | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Inlet Pipe Part Number: 8E5Z-5G274-B
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Exhaust Y Pipe; Front Pipe
Fits the following Mercury Models:
- Milan | 2008-2009 | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Inlet Pipe, Green Part Number: 8E5Z-5G274-C
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Front Pipe
Fits the following Mercury Models:
- Milan | 2008-2009 | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Inlet Pipe Part Number: 8E5Z-5G274-D
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Front Pipe
Fits the following Mercury Models:
- Milan | 2008-2009 | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Exhaust Pipe Part Number: 9G1Z-5G274-A
Product Specifications
- Other Name: Pipe - Exhaust; Tail Pipe
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Exhaust Pipe Part Number: 9G1Z-5G274-B
Product Specifications
- Other Name: Pipe - Exhaust
- Replaces: 8G1Z-5G274-F
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Exhaust Pipe Part Number: 9G1Z-5G274-C
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Y Pipe
- Replaces: 8G1Z-5G274-G
Fits the following Mercury Models:
- Sable | 2008-2009 | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Inlet Pipe, Front Part Number: F2AZ5246C
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Front Pipe; Pipe - Exhaust - Front
- Position: Front
Fits the following Mercury Models:
- Grand Marquis | 1992-1994 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Front Pipe Part Number: 9E5Z-5G274-A
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe; Exhaust Y Pipe; Exhaust Pipe
Fits the following Mercury Models:
- Milan | 2010-2011 | Premier | 6 Cyl 3.0 L FLEX

| Page 1 of 2 |Next >

1-20 of 29 Results

Mercury Tail Pipe

If you own Mercury and want to keep it in top shape, choosing OEM Tail Pipe is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Mercury Tail Pipe at some of the affordable online prices without cutting quality. Every OEM Mercury part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Mercury Tail Pipe Parts and Q&A

Inlet Pipe
4W7Z-5246-BA
Q: How to Service the Muffler and Tail Pipe on Mercury Grand Marquis?
A:
Starting work on the muffler and tailpipe requires users to disable the air suspension electrical power because unexpected air spring changes could move the vehicle while working. The vehicle should be in neutral gear when placing it on the hoist while removing the clamp. Enter the exhaust cutter properly to cut apart the muffler from the tailpipe. The insulator needs inspection for damage and wear so install a new one before separating it from the tailpipe. The muffler installation requires performing the inspection of its insulator before installing a new one if necessary. The installation process requires new exhaust fasteners but avoid tightening them until all components reach their correct position. Finish the installation task through fastener tightening according to specifications while drawing the flanges together evenly after following the reverse order of the removal process.
Inlet Pipe
8E5Z-5G274-B
Q: How to Service the Muffler and Tail Pipe on Mercury Milan?
A:
Start muffler and tailpipe service by hoisting the vehicle when it is in neutral gear. Place a suitable jackstand correctly under the muffler and tailpipe to provide support while ensuring exhaust system components avoid excessive bending or twisting and never letting the exhaust hang freely from its flexible pipe. Secure the catalytic converter using a separate jackstand during the work process. Release the ground clip attachment from the exhaust hanger before you accomplish the Torca® clamp nut hand tightness that needs to be set to 47 Nm (35 lb-ft) during installation. Soapy water should be used to carefully split 4 or 5 muffler and tailpipe isolators from the vehicle while avoiding damage or tears. Extract the muffler along with the tailpipe from the catalytic converter. During installation proceed in the reverse order using proper inspection techniques to replace any found damaged or torn isolators. Begin the engine to test for any exhaust leak after finishing the installation.