How to Service and Repair the Accelerator Cable and Linkage on Mercury Grand Marquis?

Service and repair of throttle cables starts with front engine appearance cover removal together with the throttle control spring. Detach first the accelerator cable from the throttle body lever and unscrew the retaining screw from the bracket to pull the cable free from the accelerator cable bracket alignment. The accelerator cable requires removal from its clip before removing the nuts which also detach the LH cowl extension bracket. Begin the procedure by disconnecting the accelerator cable from the accelerator pedal and shaft but pay attention to the non-memory pedal prototype since the memory pedal matches this design. First remove the accelerator cable retainer then proceed by taking out the cable along with its grommet through the bulkhead. Finally extract the cable through the dash panel before taking it out of the vehicle. You should perform installation by conducting the steps in reverse order.

How to Service the Accelerator Cable and Linkage on Mercury Marauder?

Service of throttle cable and linkage necessitates first removing the bolts securing the accelerator splash shield. Before continuing separate both accelerator cable and speed control wires followed by removing the spring. The service requires removing the accelerator cable from its bracket then removing the vacuum hose. First remove the accelerator cable from its location in the cable retainer after which you can take off corresponding nuts. The service for the accelerator cable involves detaching it from the accelerator pedal and shaft at both non-memory and memory devices. Take the accelerator cable retainer off while pulling the cable from the dash panel to extract it fully from the vehicle. Anticipate the opposite actions used to remove the components during installation.

OEM Mercury Accelerator Cable

Choke Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Accelerator Cables found

View related parts
Mercury Throttle Cable
Part Number: F7RZ-9A758-AE
$40.89 MSRP: $74.68
You Save: $33.79 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Control
- Manufacturer Note: From pedal to throttle body, w/o anti-spin traction brakes.
- Replaces: F5RZ-9A758-S, F7RZ-9A758-AC
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base | 4 Cyl 2.0 L GAS
- Mystique | 1995-2000 | Base, GS, GS Spree, LS | 4 Cyl 2.0 L GAS
View related parts
Mercury Throttle Cable
Part Number: 5L8Z-9A758-DA
$53.28 MSRP: $99.00
You Save: $45.72 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Mariner | 2005-2006 | Base, Convenience, Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS
View related parts
Mercury Throttle Cable
Part Number: 7L8Z-9A758-D
$49.12 MSRP: $91.28
You Save: $42.16 (47%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Mariner | 2008 | Base | 4 Cyl 2.3 L GAS
View related parts
Mercury Throttle Cable
Part Number: 5L8Z-9A758-CA
$44.96 MSRP: $83.55
You Save: $38.59 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Mariner | 2005-2006 | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Throttle Cable
Part Number: 7L8Z-9A758-C
$37.68 MSRP: $68.81
You Save: $31.13 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Mariner | 2008 | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Throttle Cable
Part Number: XS8Z-9A758-DA
$166.05 MSRP: $311.28
You Save: $145.23 (47%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Control
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base, S, V6 | 6 Cyl 2.5 L GAS
- Mystique | 2000 | LS | 6 Cyl 2.5 L GAS
View related parts
Mercury Throttle Cable
Part Number: XS8Z-9A758-CA
$50.27 MSRP: $93.40
You Save: $43.13 (47%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Control
- Replaces: F7RZ-9A758-BE
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base, S, V6 | 6 Cyl 2.5 L GAS
- Mystique | 1995-2000 | Base, GS, GS Spree, LS, LS Young America | 6 Cyl 2.5 L GAS
View related parts
Mercury Throttle Cable
Part Number: 3F2Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Monterey | 2004-2007 | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
Mercury Throttle Cable
Part Number: F6DZ9A758B
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Sable | 1996-1998 | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Throttle Cable
Part Number: 2L5Z-9A758-CA
Product Specifications
- Other Name: Cable Assembly - Throttle Control; Cruise Control Cable; Cable Assembly
- Replaces: 1L2Z-9A758-GA
Fits the following Mercury Models:
- Mountaineer | 2001 | Base | 6 Cyl 4.0 L GAS
View related parts
Mercury Throttle Cable
Part Number: YF1Z-9A758-BA
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Sable | 2000-2005 | LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L GAS
View related parts
Mercury Throttle Cable
Part Number: F2VY9A758A
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Grand Marquis | 1992-1994 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Throttle Cable
Part Number: 2L2Z-9A758-CB
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Mountaineer | 2002-2005 | Base, Convenience, Luxury, Premier | 8 Cyl 4.6 L GAS
View related parts
Mercury Throttle Cable
Part Number: 4W3Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
- Manufacturer Note: DOHC (Marauder)
Fits the following Mercury Models:
- Marauder | 2003-2004 | Base | 8 Cyl 4.6 L GAS
View related parts
Mercury Throttle Cable
Part Number: F6AZ9A758AB
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Grand Marquis | 1996-1997 | GS, LS | 8 Cyl 4.6 L GAS
View related parts
Mercury Throttle Cable
Part Number: F6RZ-9A758-CA
Product Specifications
- Other Name: Cable Assembly - Control
Fits the following Mercury Models:
- Cougar | 1999-2002 | Base, S, V6 | 6 Cyl 2.5 L GAS
- Mystique | 1995-1999 | Base, GS, GS Spree, LS, LS Young America | 6 Cyl 2.5 L GAS
View related parts
Mercury Throttle Cable
Part Number: XF1Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
- Manufacturer Note: 2v
Fits the following Mercury Models:
- Sable | 1999 | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Throttle Cable
Part Number: XS4Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
- Manufacturer Note: 2V SPI
Fits the following Mercury Models:
- Tracer | 1997-1999 | GS, LS, Trio | 4 Cyl 2.0 L GAS
View related parts
Mercury Throttle Cable
Part Number: YF1Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Sable | 2000-2005 | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Throttle Cable
Part Number: YL2Z-9A758-AB
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
Fits the following Mercury Models:
- Mountaineer | 1999-2001 | Base | 6 Cyl 4.0 L GAS

| Page 1 of 2 |Next >

1-20 of 27 Results

Mercury Accelerator Cable Parts Questions & Experts Answers

Throttle Cable
4W7Z-9A758-AA
Q: How to Service and Repair the Accelerator Cable and Linkage on Mercury Grand Marquis?
A: Service and repair of throttle cables starts with front engine appearance cover removal together with the throttle control spring. Detach first the accelerator cable from the throttle body lever and unscrew the retaining screw from the bracket to pull the cable free from the accelerator cable bracket alignment. The accelerator cable requires removal from its clip before removing the nuts which also detach the LH cowl extension bracket. Begin the procedure by disconnecting the accelerator cable from the accelerator pedal and shaft but pay attention to the non-memory pedal prototype since the memory pedal matches this design. First remove the accelerator cable retainer then proceed by taking out the cable along with its grommet through the bulkhead. Finally extract the cable through the dash panel before taking it out of the vehicle. You should perform installation by conducting the steps in reverse order.
Throttle Cable
4W3Z-9A758-AA
Q: How to Service the Accelerator Cable and Linkage on Mercury Marauder?
A: Service of throttle cable and linkage necessitates first removing the bolts securing the accelerator splash shield. Before continuing separate both accelerator cable and speed control wires followed by removing the spring. The service requires removing the accelerator cable from its bracket then removing the vacuum hose. First remove the accelerator cable from its location in the cable retainer after which you can take off corresponding nuts. The service for the accelerator cable involves detaching it from the accelerator pedal and shaft at both non-memory and memory devices. Take the accelerator cable retainer off while pulling the cable from the dash panel to extract it fully from the vehicle. Anticipate the opposite actions used to remove the components during installation.