Other Name: Motor Assembly - Window Operating; Power Window Motor, Rear Right; Power Window Motor
Position: Rear Passenger Side
Fits the following Ford Models:
Expedition | 2007-2017 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Expedition | 2022-2024 | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Other Name: Motor And Linkage Assembly; Power Sliding Window Motor, Rear; Window Regulator, Rear Center; Motor Assembly; Motor & Linkage
Position: Rear
Fits the following Ford Models:
F-150 | 2015-2020 | King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL, XLT | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.3 L FLEX, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 5.0 L FLEX
F-250 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
F-350 Super Duty | 2017-2024 | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View More
| Page 1 of 17 |Next >
1-20 of 322 Results
Ford Power Window Motor Parts Questions & Experts Answers
Q: How to service and repair the rear power window motor, and why is it essential to initialize it on Ford Explorer?
A: During the repair process of the rear window motor operators must run an initialization procedure at each phase of power rear window system service regardless of removing the motor from the window regulator drum housing or installing new components like motors and regulators, window glass modules or applying lubricants to the system. The first step requires removal of the rear window glass regulator. Tighten the three window regulator motor bolts to 4 Nm (35 lb-in) when rejoining them during installation. Reverse the removal procedure for installing the window regulator motor and do not forget to initialize the power rear window motor when this step is complete.
Q: How to Service and Repair the Rear Door Power Window Motor and Regulator on Ford Focus?
A: Service and repair work on the rear door window motor and regulator begins by taking out the rear door speaker and side impact bolster before moving the door latch release handle to the side. When handling the adhesive surface you should exercise caution because contact will harm the re-bonding ability. Afterward remove the watershield. Mount the regulator clamp to the access hole while connecting the window operating switch electrical connector. Push out the pin and sleeve to remove the regulator clamp from the window glass before securing the glass support with proper hooks at the top opening edge. Disconnection of both the window operating switch electrical connection and motor electrical connection must follow the glass attachment procedure. The installation ends by reversing the removal steps while removing and reattaching all motor and regulator securing bolts.
Q: How to service the rear quarter Power Window Motor on Ford Mustang?
A: Begin the service of the rear quarter window regulator motor by taking out the rear quarter window glass. Seize the two bolts accompanied by the rear quarter window inner belt weather strip before hand-tightening the bolts to 9 Nm (80 lb-in) during reassembly. First disconnect the electrical connector from the rear quarter window motor then uninstall the harness locator from the rear quarter window regulator and motor assembly. While uninstalling the three nuts from the rear quarter window regulator and motor assembly avoid touching the jack screws because assembly needs 10 Nm (89 lb-in) torque when reinstalled. The reverse order of the removal steps should be used to finish the installation.