Other Name: Remote Control System; Keyless Entry Transmitter; Transmitter
Manufacturer Note: 5 Buttons
Fits the following Ford Models:
Expedition | 2007-2014 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Remote Control System; Keyless Entry Transmitter; Transmitter; Transceiver
Manufacturer Note: 4 Buttons
Replaces: 2S4Z-15K601-AB
Fits the following Ford Models:
Crown Victoria | 2007-2011 | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
Escort | 1998-2003 | LX, SE, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R | 4 Cyl 2.0 L GAS
Expedition | 2003-2014 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, XL, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Explorer | 2002-2010 | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
Five Hundred | 2005-2007 | Limited, SE, SEL | 6 Cyl 3.0 L GAS
Focus | 2000-2011 | LX, S, SE, SEL, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
Mustang | 2005-2014 | Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
Police Interceptor Sedan | 2013-2019 | Base | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS
Special Service Police Sedan | 2014-2018 | Base | 4 Cyl 2.0 L GAS
Taurus | 2013-2019, 1998-2007 | Limited, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 8 Cyl 3.4 L GAS
E-150 | 2008-2014 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
E-250 | 2008-2014 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
E-350 Super Duty | 2008-2019 | Base, XL, XLT | 10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX
Escape | 2005-2008, 2001 | Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
Explorer | 1998-2001 | Eddie Bauer, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
Explorer Sport Trac | 2007-2010 | Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
F-150 | 2004-2014 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
F-150 Heritage | 2004 | SVT Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
F-250 Super Duty | 2008-2010 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
F-350 Super Duty | 2008-2010 | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
Other Name: Remote Control System; Keyless Entry Transmitter; Transceiver
Fits the following Ford Models:
E-350 Super Duty | 2015-2019 | Base | 10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG, 8 Cyl 6.2 L FLEX
Q: How to program or reprogram all remote transmitters simultaneously on Ford Explorer?
A: A synchronized execution of programming or reprogramming tasks is necessary for all remote transmitters. The procedure starts with electronic unlocking of your vehicle by using the remote transmitter along with the keyless entry keypad if present and door lock control switch while the driver door remains ajar. Start by rotating the key from OFF position to RUN eight times in less than ten seconds; the eighth move should end on the RUN setting and successful access will cause door locks to engage before unlocking. Pressing any button on a remote transmitter during the period of 20 seconds will trigger the doors to perform locking and subsequent unlocking operations for confirmation of correct programming. The procedure should be applied to each individual remote transmitter. When the door locks do not respond to the button you should wait for a few seconds before pressing it again. Testing for inspection and verification should be performed when there is no response from the door locks to verify that the programmer has not exceeded the maximum allowed number of remote transmitters. The key moving to OFF position marks the program exit as well as hitting the 20-second timer from program entry or programming the maximum remote transmitters.
Q: How to program keyless entry remote transmitters on Ford Focus?
A: An effective process to program keyless entry remote transmitters requires you to work with a maximum of 4 devices at once with a fully charged battery and an unactivated anti-theft system. Start the procedure by sealing all doors since this helps avoid conflicting system sounds throughout the programming process. Operate the ignition switch from position I to position II four times in six seconds followed by positioning it to 0. The system will generate a sound that indicates the learning mode has started. To confirm the programming process of a new remote transmitter press any button on the remote within ten seconds until the chime sounds as a signal the programming was successful. The learning mode enters automatically a second time for ten more seconds following each successful programming while allowing the programming of four transmitters in total. The button press should be repeated during the time limit to add extra transmitters. The learning mode from the system ends when the ignition switch reaches position III or after a ten-second lack of programming or when the maximum four transmitters have been added. Failed programming attempts will not erase any previously stored codes but will lead to acceptance of the newly added transmitters. All programmed remote transmitters must be tested by both activating and deactivating the remote locking and unlocking functions.
Q: How to program or reprogram keyless entry remote transmitters into the central security module on Ford Ranger?
A: Security specialists must set all keyless entry remote transmitters during the same programming process in the central security module. To begin programming start the vehicle from an OFF position to RUN state for eight times in less than ten seconds before stopping at RUN position; this correct procedure leads to door operation along with unlocking and locking functions. Hitting any button on a keyless entry remote transmitter from the program will result in the doors to lock and unlock as an indication to determine the transmitter programming status. The troubleshooting process should start with waiting several seconds before pressing the button a second time for door lock response. A failure to respond should prompt a diagnosis and testing. Users can leave program mode by using either the OFF position of the ignition switch or waiting for a maximum of twenty seconds after the previous step. The programming of keyless entry remote transmitters causes the security module to conduct a final door locking and unlocking sequence to validate the programming status.